Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will safeguard your precious vehicle from key-long theft as well as relay theft. With a personalised PIN sequence, unless you know the code your car won't start!
It also has Transport Mode that allows you to turn off the device temporarily, ideal for vehicle transport and servicing. The device then activates by entering a PIN again.
No Key Fobs or Led Indications
The Ghost 2 immobiliser is a breakthrough in automotive security technology that provides a strong defense against the latest techniques of car theft. Its undetectable installation and engine start blocking can reduce the chance of your vehicle being stolen, which can offer peace of mind and could even reduce insurance premiums.
It isn't detectable by scanners, and it is not hacked using common methods such as key cloning or signal jamming. The device uses buttons on your vehicle, like those found on the steering wheel and door panels, to generate an unique PIN number that can be changed. This sequence can be as long as 20 presses. If the correct sequence is entered or when a beacon or mobile app is utilized, only the owner is able to start the engine, providing an additional layer of security against thieves.
You can also turn on an easy service mode for situations such as valet parking and maintenance that require you to temporarily disable the system. This can be accomplished quickly and easily using an app for mobile devices, which means your car remains secure whilst working on it. After the task is completed it is easy to switch back to secure mode. This ensures that your vehicle is protected at all time.
The Ghost 2 is far more user-friendly than other systems that require fobs. The app can be used as a spare key in the event of an emergency. This allows you to drive while your security is shut off, without needing to enter a PIN code.
No Radio Frequency Signals
Unlike traditional security systems that have their own dedicated remote, the Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be operated using buttons already on the centre console or steering wheel. The device is also undetectable by thieves using RF scanning or grabbing technology, which means your car won't even start for them even if they do manage to steal your keys.
The device makes use of an exclusive 'password' sequence of buttons that locks the engine. The personalised PIN code can be entered via the app or using the existing buttons on the steering wheel and centre console. You can also lock the gearbox, to ensure that your vehicle is not able to be driven until you have your key or enter your pin code. The device can be set to transport mode, which allows you to drive the car without having to enter your pin code. This can provide additional protection for your vehicle if it is parked in a valet or service.
The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as discreet as it can be, making it a desirable alternative for those who have spent a lot of money on personalizing their cars or own rare or expensive cars. Many have reported that this device is a great way to prevent their cars from being stolen. Many have told stories of attempted car thefts that were foiled by it. The Ghost 2 also offers a wide range of options and customers have reported that it works with their regular keys for their cars and also with their vehicle's emergency button, giving them peace of mind when they're away from their vehicle.
No Radio Frequency Scanners
Secure your vehicle from hacking, key cloning and key theft with a Ghost immobiliser. The system utilises the buttons in your vehicle, for example those on the dashboard and your steering wheel, to create a unique, changeable sequence of buttons that only you know. Without this sequence, your car cannot start. The combination of a unique disarm sequence and the absence of radio frequency signals makes the device difficult to hack or disable.
The Ghost CAN Immobiliser is a better alternative to Thatcham approved devices that rely on radio frequencies scanning. It works silently without external signals and doesn't rely on any external signals. It's a much safer alternative and also offers insurance-approved status when it's installed by a TASSA approved installer (we're one of them! ).
Due to the nature of how the Ghost immobiliser works with your vehicle, it is advised to have a professional installer carry out the installation. This ensures that it is seamlessly integrated into your vehicle systems, resulting in maximum performance and a significantly reduced chance of failure.
Professional installation is often accompanied by warranties and support to further enhance the value of your purchase. This is a major deterrent to would-be thieves who are less likely to try and bypass the device because of its extensive security features.
In addition to being an excellent deterrent against thieves, the Ghost is designed to be user-friendly too. It can be configured to automatically re-arm after a certain amount of time, which means you don't need to remember your PIN every time you park your car. It also offers the option of Service/Valet Mode in the event that you need to turn your vehicle over for servicing or valet parking, which can be disabled or enabled based on your preference using an easy indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and doesn't require cutting of wires during installation. It connects to your vehicle's CAN data network and is programed with a unique PIN which prevents other people from starting your engine if they don't have a personal PIN sequence or app authorisation.
It is also unnoticeable by the specialist scanners that thieves use, and it is silent as it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed, and small enough to hide anywhere within the vehicle.
Another added benefit of the Ghost II is that it can be put into "transport mode" for brief durations without the need for a personalised PIN sequence. This is ideal in situations such as giving the car to a family or friend member or in an emergency situation. You can start your vehicle quickly and safely.
When installing the Ghost II, it's important to be in a well-lit area and wear safety equipment when working with electrical and tool components. A basic set of hand tools will allow you to make precise connections, while a multimeter can help determine electrical values and ensure that your wiring is secure. Cable ties and insulation tape can be used to shield or join any exposed or cut wires that are exposed during the installation process.
It is crucial to disconnect the vehicle's battery before beginning any wiring work. This will prevent any airbag deployments as well as electrical shocks when the Ghost II is connected to the vehicle's system when the battery is disconnected.
Easy to Install
The Ghost immobiliser, a unique device from the next generation, operates by connecting directly to your vehicle's CAN Data Network. It utilizes a unique pin code to stop it from getting started. This makes it more difficult to crack than conventional key fobs and alarm systems, and provides superior security against key cloning hacking, as well as relay attacks.
what is a ghost immobiliser can be concealed within your vehicle, and it makes use of the buttons on your dashboard and steering wheel to create a unique sequence you only know. This prevents thieves from being able to make use of a duplicate key to start the car. It can also stop them from using a diagnostic tool that thrives on hacking the OBD.
Installation is simple and requires no cutting of wires. The unit connects to the vehicle's CAN bus system via a constant 12V supply and the ground connection. A multimeter is required in order to determine the correct wires. Basic hand tools can be used for the installation. To protect the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can be used to keep the wiring neat.
Once installed the unit is in a learning mode, and records your specific sequences of buttons and sequences to generate your unique pin code. The information is saved in the CAN network, making it nearly impossible for anyone to duplicate your sequence and start your vehicle.
Transport Mode is a function that can be utilized in the event of an emergency when you forget your PIN code, sell your vehicle, or a button becomes inoperative. This will shut down the Ghost system completely, but will reactivate automatically when you reach 31mph for over 15 minutes or you enter your PIN Code. This is ideal for those who regularly rent out their vehicles on services like Turo or ZipCar.